AERO-PAC - Association of Experimental Rocketry of the Pacific

AeroPac 2012 Launch Schedule

Waiver 100,000ft MSL (96,500 ft AGL)
Club members meetings will be held at the launches on Saturday after the day waiver closes.
On Research Launch days spectators must stay clear of the launch pads and any area where people are prepping research rockets and or motors.
Saturday (and sometimes Friday) Night launch with 7,500ft MSL (4,000 ft AGL) waiver, J motors and under. All HPR rockets must carry visible strobes.

Non launch meetings and events

Equipment engineering party - February 11th 9:00am to 3:00pm - Richard Hagen's Workshop
Equipment cleaning party - April 9th 10:00am to 3:00PM at Steve Wigfield's Workshop. Traditional Pizza lunch!
Maker Faire - TBA - contact Charlie Wittman

We are getting close to the Maker Faire and we need your help and for you to bring rockets or any other displays you want to show. I am hoping folks who have brought big rockets will bring them again. We have the same room and a bit bigger launch area this year. We are hoping to have some more rocket folks from other areas like TCC, SARG, ROC to talk about their clubs. Please sign up and it there are any problems let me know. Your help makes sure we can continue to do these huge events with 80k attendees. I hope we even get a visit from Mercury Joe.

I have posted a sign up sheet at the link below and you do not have to be on google to edit and save. There are tabs along the bottom indicating shift times. Please fill in all you can work with your name and "email only on the first line worked". We need 15 at any one time for the Lunar build/fly and about 4 for AeroPac which includes one position for ARLISS.

Fill in your name and then hit save/close. Any folks coming from TARC or other clubs, please sign up under Lunar. We submit this list to the MF organizers so they know who to give a ticket to for entry. Details will follow for volunteers closer to the event. If you have any questions, email me.

1. open the link to the schedule
2. type in name on shifts you will work
3. put your email address next to the first occurance of your name
4. To save just close the document

http://spreadsheets.google.com/ccc?key=0AvJdbKklK6VudFF5Y3NDcXJNaExQRFUzcFhHSGhRaGc&hl=en

End of the year member's party - December 4th (location to be announced)

Steve Wigfield's Workshop:

660 Lakeville St, Petaluma.

Directions: From either the north or south, take 101 to Petaluma, take the Napa Sonoma 116 east exit. When you exit you will come to a stop light, turn right, you will be heading north west on Lakeville Street. Steve's shop is about 1/4 of a mile from 101 on the left side of the street, 660 Lakeville St. There is a sign in the lawn in front of the building, Steve's shop is in the back of the building. The building is between a car wash and a junk yard.

Richard Hagen's Workshop:

HSD Engineering Inc.
10828 Bancroft Ave.
Oakland, CA 94603
510-553-9132 Shop phone